My Community
Tackle Talk => Reel Repair & Maintenance => : xjchad November 30, 2017, 02:21:38 PM
-
After 6 skunkings in a row fishing 2 long rods each time, I've decided to put together a critter rod to try and get some kind of action while the big bait is soaking. I already had a vintage 9' Fenwick that I picked up at a yard sale for $20 and I just found this little Penn Beachmaster 155 for $15 on Craigslist.
My plan is to build out this little reel to be bullet proof for critters, but still handle a medium size bat if it happens. I'm adding an aluminum spool, custom adjustable mag, Carbontex drag stack, stainless sleeve, power handle and knob, upgraded stainless screws, and stiffening the frame with a Newell base and custom spacer bar braces that I 3D printed.
Here's what it looks like before disassembly.
(https://i.imgur.com/ccyC6kF.jpg)
(https://i.imgur.com/yfwLcOK.jpg)
(https://i.imgur.com/nKlDOvO.jpg)
I'll add to this post as I get the parts and begin the build.
-
I'm looking forward to the updates!
-
Here's a teaser pic of my prototype spacer bar supports.
(https://i.imgur.com/XkVsFID.jpg)
-
Got some parts from Smooooth Drag and McMaster Carr today :)
Everything has been soaking in Simple Green all weekend.
Hopefully I can finish cleaning and assemble it this week!
(https://s20.postimg.org/kg05oqg2l/IMG_3567.jpg) (https://postimages.org/)
-
I was able to get a little progress on it today.
Fabricated and installed the adjustable mag system.
(https://i.imgur.com/2teRSBj.jpg)
-
I was able to get a little progress on it today.
Fabricated and installed the adjustable mag system.
(https://i.imgur.com/2teRSBj.jpg)
I like that! Nice Chad!
-
Here's the 9' Fenwick it's going on.
(https://s20.postimg.org/kqa3vcqst/IMG_3652.jpg) (https://postimages.org/)
(https://s20.postimg.org/g4dzn0czh/IMG_3651.jpg) (https://postimages.org/)
-
Ok guys, here she is in all her glory!
Penn Beachmaster 155. Aluminum spool, Newell base and clamp, Smooth Drag handle, knob, stainless sleeve, and drag washers, stainless allen screws, custom adjustable mag, and custom 3d printed spacer bar supports. Can't wait to spool it up and put it to the test!
(https://s20.postimg.org/g0369rfvx/IMG_3665.jpg) (https://postimages.org/)
(https://s20.postimg.org/62s5go5p9/IMG_3666.jpg) (https://postimages.org/)
(https://s20.postimg.org/jv6kcvwn1/IMG_3668.jpg) (https://postimages.org/)
(https://s20.postimg.org/z56fji7el/IMG_3669.jpg) (https://postimages.org/)
(https://s20.postimg.org/exszr6mrx/IMG_3671.jpg) (https://postimages.org/)
(https://s20.postimg.org/ct8mq4g0d/IMG_3673.jpg) (https://postimages.org/)
-
Looks great! I can’t wait to see your adjustable mag for your 6/0 8)
-
Looks great! I can’t wait to see your adjustable mag for your 6/0 8)
You’re making one for the 6/0?!! I’m interested in seeing you cast it out! That’s a big a$$ spool!
-
I'm interested in seeing me cast it too LOL!
Bill was playing around with his at the park the other day and not doing too bad :D
-
Keep us posted. That looks like the old surf striper gear from out east.